Skip to content
HVAC Salt Lake City UTSalt Lake City, UT · HvacCall (385) 832-6187
Rows of ribbed round metal ducts and rectangular ductwork running along a ceiling

Serving Salt Lake City, West Valley City, West Jordan, Murray and nearby towns

Ductwork Repair, Sealing and Replacement in Salt Lake City, UT

HVAC Salt Lake City UT · Ductwork repair, duct sealing, replacement and air duct cleaning for homes in Salt Lake City, West Valley City, West Jordan and Murray.

  • No cost to ask
  • Done by HVAC Salt Lake City UT
  • You decide whether to hire
  • No cost to askAsking for a price costs you nothing.
  • Done by HVAC Salt Lake City UTHVAC Salt Lake City UT prices the job, then does it.
  • Sourced prices and rulesEach price, permit and local rule here shows where it came from and when.
  • Updated November 22, 2026Pages are reviewed before they go live and dated when they change.

Ductwork repair in Salt Lake City starts with one question: where is the air going? The U.S. Department of Energy says about 20% to 30% of the air moving through a typical duct system is lost to leaks, holes and poorly connected ducts. That is a national figure, not a measurement of your home, but it shows why the ducts deserve a look before you spend money on new equipment.

Nationally, a duct repair runs $200 to $800 depending on the damage (Bob Vila, 2023). Replacing ducts runs $16 to $19 per linear foot, or about $3,100 to $3,700 for 200 feet (This Old House, 2026). A simple duct system takes 1 to 2 days to replace, and a large or complex one takes 4 days or more. Prices in Salt Lake City depend on your home and equipment, so ask for a written price after the technician sees the system.

This page covers ductwork repair, duct sealing, ductwork replacement, new duct installation and air duct cleaning for homes in Salt Lake City. The crew comes out and measures, calls back within one business day, gives a written price before any work starts, and pulls the City permit when the job needs one. Below you will find the signs that ducts need work, how testing, sealing and repair differ, what replacement involves, a price table with dates, how long ducts last, when EPA says cleaning may be warranted, and the questions to ask any company that quotes you.

Signs your ductwork needs attention

These are the signs worth acting on, and what federal agencies and home guides say about each one.

Uneven temperatures between rooms

A room that stays hotter or colder than the rest of the house is the sign most owners notice first. The Department of Energy's Energy Saver guide says disconnected or crushed ductwork can restrict airflow so that warm or cool air never reaches the room it is meant for. A This Old House guide to air balancing says a difference of more than 2 or 3 degrees between rooms or floors is a sign of imbalance. The same guide says additions, new walls or new windows can change how much airflow a home needs. If one room is your problem, our page on one room colder than the others goes through it.

Salt Lake City asks a lot of a duct system in both seasons. NOAA's 1991-2020 normals for the airport show 5,154 heating degree days and 1,420 cooling degree days a year, so heating is the bigger load. The same normals show about 62 days a year at 90 degrees F or hotter and about 112 nights a year at or below freezing. The same ducts carry cooled air in July, when the average high is 94.0 degrees F, and heated air in January, when the average low is 24.2 degrees F.

Leaky ducts and energy loss

The Department of Energy's purchasing guide for air-source heat pumps also lists leaky ducts, with oversizing and a wrong refrigerant charge, among the installation problems that cut heat pump efficiency. It recommends installation to the ANSI/ACCA Quality Installation Specification. Our page on leaky ducts and energy loss goes deeper on this problem.

Dust, humidity and visible mold

The Department of Energy says sealing ducts with fiberglass mesh and mastic can control humidity and dust. Visible mold is a different case. EPA says that if the cause of mold growth in the ducts is not corrected, the mold will come back. EPA also says wet or moldy fiberglass duct material should be replaced, not cleaned. The air duct cleaning section below covers when EPA says cleaning may be warranted.

Before you call, note which rooms are off, in which season, and what changed before it started: an addition, new windows, a new furnace or air conditioner. That history tells the technician where to look first.

Duct leakage testing, duct sealing and duct repair

These three jobs overlap, and companies describe and price them in different ways. A useful order is to find the loss, close it, then fix what is damaged. Each step has its own questions to ask.

Duct leakage testing and duct inspection

Duct leakage testing is how you learn whether your system looks like the national picture or not. If a company offers a test, ask what it measures, what number it reports and whether you will get the result in writing. If the company retests after the work, ask for that number too.

A duct inspection is a lower-cost first step. Bob Vila's 2023 duct guide gives $70 to $130 for an air duct inspection, a national range. Ask what the inspection covers and whether the fee is credited if you hire the same company for the repair.

Duct sealing and air duct sealing

Duct sealing closes leaks and loose joints so the air you pay to heat or cool reaches the rooms. DOE points to fiberglass mesh and mastic as a way to seal ducts. For the inside of the duct, EPA's guidance is more careful: it does not routinely recommend duct sealants sprayed inside ducts, and it says sealants should never go on wet duct liner, active mold or debris. If a company proposes air duct sealing from the inside, ask why it recommends it for your system and what it does when the duct liner is wet or moldy.

Duct repair, duct leak repair and duct repair and sealing

Duct repair covers the damage the Department of Energy describes: ducts that have come apart and ducts that are crushed. Duct leak repair closes the holes and failed joints that testing finds. Many jobs are both at once, and a company may bundle them as duct repair and sealing. If a company finds damage in many places, ask it to price repair and replacement side by side so you can compare them on one page. When the job is under a City permit, Salt Lake City says inspections are requested before any work is covered, so ask that duct repairs inside walls or ceilings are inspected before they are closed up.

Ductwork replacement, new ductwork and duct installation

Ductwork replacement takes out old runs and puts in new ones. New duct installation is the same kind of work where a home has no ducts yet. Replacement is priced by length and material: This Old House's 2026 duct replacement guide gives $16 to $19 per linear foot nationally. The crew coming out and measuring is the step that turns a national range into a written price for your home.

Duct types and materials

The guide names four common choices. Materials only, per linear foot, they run $1 to $3 for flexible uninsulated duct, $2 to $4 for flexible insulated duct, $4 to $7 for fiberboard and $7 to $15 for sheet metal (This Old House, 2026, national range). The same guide gives lifespans: flexible ducts last 10 to 20 years, fiberboard 10 to 15 years, and sheet metal 20 years or more.

Sheet metal costs the most per foot of the four and, in the same guide, lasts the longest. Flexible uninsulated duct costs the least per foot. If a company proposes flex duct replacement for one run, ask what it would use for the rest and why. Materials are only one part of a job, so compare whole written prices, not just the per-foot figure.

Duct design and sizing

Duct design decides how large each run is and where it goes. ACCA describes its Manual J as the national ANSI-recognized standard for sizing home heating and cooling equipment. ACCA also says a proper load calculation is required by national building codes and most local jurisdictions. DOE warns that oversized cooling systems cost too much and give poor comfort, and says the contractor should size equipment with Manual J.

The Better Business Bureau gives a plain buying tip: ask each contractor to explain how it worked out the capacity it recommends. Ask the same about duct sizes. For a replacement, the BBB also says the estimate should list all related work such as ducts, registers and wiring.

Duct insulation, attic ductwork replacement and crawl space duct repair

Salt Lake City is in Climate Zone 5B, which sets insulation and equipment rules in the energy code (Salt Lake City Building Services). Utah's statewide codes include the 2024 International Energy Conservation Code, effective July 1, 2026, and homes follow the energy chapter of the 2021 International Residential Code. Duct insulation is where those rules meet your house, so ask any company which insulation it proposes and where it goes.

Attic ductwork replacement and crawl space duct repair are priced the way other duct work is priced: by the length of duct and the material, as the per-foot figures above show. Ask the crew to measure each run in feet and to name the material for each. Insulated flexible duct costs $2 to $4 per foot in materials against $1 to $3 for uninsulated flexible duct (This Old House, 2026, national range).

New ductwork with a furnace, air conditioner or heat pump

New ductwork often comes with an equipment job, and the national guides price it that way. Bob Vila's 2024 central air guide gives $1,100 to $2,700 for new ductwork with an AC installation. Its furnace guide gives $2,000 to $5,000 for new ductwork with a furnace, a national average range. Its heat pump guide gives $3,000 to $7,500 for new ducts with a heat pump. The furnace guide also says installing a furnace takes 4 to 18 hours, longer when ductwork must be repaired or added.

If you are weighing a heat pump and your home has no ducts, a ductless mini-split is another path. This Old House says a ductless mini-split needs one hole through the wall for the line set, bored about 3 inches across, with the condensate drain sloped slightly down to the outside. That is a different job from running ducts.

Call (385) 832-6187Get your quote

Ductwork cost in Salt Lake City

The table below gives dated national ranges so you can tell whether a written price is in a sensible neighborhood. Our HVAC cost guide for Salt Lake City puts these ranges next to the other jobs a system needs.

JobNational rangeSource and date
Duct repair, by severity$200 to $800Bob Vila duct guide, 2023
Air duct inspection$70 to $130Bob Vila duct guide, 2023
Replace ducts, per linear foot$16 to $19This Old House, 2026
Replace ducts, 200 feet$3,100 to $3,700This Old House, 2026
New ductwork with an AC installation$1,100 to $2,700Bob Vila central AC guide, 2024
New ductwork with a furnace (average range)$2,000 to $5,000Bob Vila furnace guide, 2024
New ducts with a heat pump$3,000 to $7,500Bob Vila heat pump guide, 2024
Whole-home air duct cleaning$268 to $492, average $379Bob Vila duct guide, 2023
Air duct cleaning, per supply vent$25 to $50, average $35Bob Vila duct guide, 2023
Air duct sanitizing$100 to $250Bob Vila duct guide, 2023

What moves the price of ductwork

Length comes first, because replacement is priced per linear foot: $16 to $19 nationally (This Old House, 2026). Material is second, with materials-only figures from $1 to $3 per foot for flexible uninsulated duct to $7 to $15 per foot for sheet metal. Damage is third. The national repair range runs from $200 to $800 depending on the damage (Bob Vila, 2023), so ask the company what it found and where.

Bundling matters too. New ductwork bundled with a furnace, AC or heat pump is priced as part of a larger project, as the table shows. Ask whether a number you are given is ductwork alone or ductwork inside an equipment job.

Two smaller items change the total. Salt Lake City permit fees are based on the value of the project, counting all material and reasonable labor. Ask for the permit fee to be listed as its own line on your written quote. In Utah, materials a contractor installs so that they become part of the house are taxed to the contractor when it buys them, so tax is part of the contractor's price. Ask whether tax is already included in the price you are quoted.

How to read a written price

A written price should be a document you can compare, not a number on the back of a card. Utah's Division of Professional Licensing consumer guide says to put every job in a written contract with the exact work, the price, start and finish dates, who gets the permit and a guarantee of liability coverage. The Federal Trade Commission adds the contractor's license number, your right to cancel and no blank spaces. When you compare written prices from any two companies, check that both name the length of duct, the material, whether insulation is included, who pulls the permit and what happens if a hidden problem turns up.

How long ductwork lasts, and whether to repair or replace

Ductwork lifespan depends on the material, as the lifespans above show. Those are national guide figures from This Old House (2026), and your ducts could last more or less depending on the material, the install and the damage they have had.

To choose between repair and replacement for your ducts, these questions do the work:

  • Is the damage in one place or many? Ask the company to say where it found damage, and to price repair and replacement if it is in many places.
  • Is the duct material wet or moldy? Fiberglass duct material in that state should be replaced, not cleaned, according to EPA, NADCA and NAIMA.
  • Is the cause fixed? A mold problem returns when its cause is left in place.
  • Is new equipment coming? A furnace installation takes longer when ductwork must be repaired or added, so ask whether the equipment quote includes duct work or leaves it out.

Salt Lake City requires a permit to install or alter a home's mechanical system, so ask whether the repair, the replacement or both need one, and ask for the permit fee to be listed as its own line on each written price.

Air duct cleaning: when it is worth it

Air duct cleaning is a separate job from repair and sealing. EPA's guide "Should You Have the Air Ducts in Your Home Cleaned?" is the main source here.

When EPA says air duct cleaning may be warranted

EPA says duct cleaning has never been shown to prevent health problems. It does not recommend routine duct cleaning, only cleaning as needed. It lists three cases where cleaning may be warranted: substantial visible mold in hard-surface ducts, vermin in the ducts, and ducts clogged with excessive dust and debris.

Bob Vila's duct cleaning guide says to clean air ducts as needed, or every 5 to 7 years. The two sources read differently. EPA's position is cleaning as needed, so ask any company what it saw in your ducts that calls for cleaning.

Salt Lake Valley winters raise their own air questions. NOAA's Chemical Sciences Laboratory says strong multi-day winter inversions trap pollution near the ground, mostly in December, January and early February, and that winter fine-particle levels in the Salt Lake area exceed national air quality standards on about 18 days a year on average. If those days have you thinking about duct cleaning, EPA's filter advice is the more direct step: use a filter rated at least MERV 13, or as high as the system fan and filter slot allow.

What a proper duct cleaning includes

EPA's checklist for a proper job has four parts. The cleaner opens access ports to reach the whole system. It uses vacuum equipment that exhausts outside the home. It protects carpets and furniture. It leaves every part visibly clean. Ask a company to explain how it does each of the four.

Be careful with add-ons. EPA has registered no chemical biocides for use inside internally insulated air ducts. Air duct sanitizing runs $100 to $250 nationally (Bob Vila, 2023), so ask what product would be used and where.

Air duct cleaning cost and duct cleaning cost

Beyond the table above, national air duct cleaning cost is also given by area: $0.15 to $0.30 per square foot, or $225 to $450 for a 1,500-square-foot house (Bob Vila, 2023). Dryer vent cleaning, a different job from air ducts, runs $100 to $170 as a national average range (Bob Vila, 2023). Professional mold remediation runs $600 to $2,000, national range (Bob Vila, 2023).

Ask any air duct cleaning service how it prices: by vent, by square foot or by the job. Ask what the quote covers, and get the answer in writing.

Questions to ask an air duct cleaning company near you

If you search for air duct cleaning near me, keep EPA's advice in mind. EPA says not to hire duct cleaners who make sweeping health claims or sell duct cleaning as routine maintenance. EPA also says it does not certify, endorse or approve duct cleaning companies, so a claim of EPA certification for duct cleaning is a warning sign. These questions sort out the rest:

  • Will you show me any mold or other contamination you say exists? EPA says to ask this, and to ask whether the company holds relevant state licenses.
  • Does your process match EPA's four-part checklist?
  • What will you do about the cause if you find mold?
  • Is the price a flat figure, or does it change with the number of vents or the size of the house?

Call (385) 832-6187Get your quote

Return air, zoning systems and airflow balance

Supply ducts carry conditioned air to the rooms, and return ducts bring air back to the equipment. This section covers return air, air balancing and zoning. In Salt Lake City, where heating is the bigger load at 5,154 heating degree days a year against 1,420 cooling degree days (NOAA, 1991-2020), tell the technician which season the problem shows up in.

Return air duct and adding a return air vent

If one room stays off from the rest of the house, ask the crew two plain questions. Does that room have a return path for air? Would adding a return air vent change how that room behaves? You are asking for an answer based on your house, not a standard fix. A written price for any new return air duct work should name where it goes and what it replaces.

Air balancing

This Old House describes air balancing as adjusting dampers and vents so that conditioned air reaches every room evenly. Ask whether the technician has tried balancing before proposing a larger job.

HVAC zoning systems

An HVAC zoning system divides the home into areas that each have their own thermostat, with dampers in the ducts to control the air for each area. What is an HVAC zoning system for, and do you need one? That depends on how your rooms and ducts are laid out, and it is a question for the visit. Ask for a written price for zoning after the technician looks at your ducts and rooms. Ask what the technician tried first, such as balancing, and what the zoning system will do that balancing cannot.

Permits, codes and licences for ductwork in Salt Lake City

Salt Lake City Building Services says a permit is required to install or alter a home's mechanical (heating, ventilation and air conditioning), electrical or plumbing system. Whether a given duct job needs one depends on the work. When it does, HVAC Salt Lake City UT pulls the City permit. Every application goes through the city's Citizen Access Portal, and the office page is Salt Lake City Building Services.

Who pulls the permit and who schedules the inspection

The owner of an owner-occupied primary home may get the permit, and an owner who does must also submit an Owner/Builder Certification. For a rental or commercial property, a contractor must get the permits and do the work. An owner or representative may get the permit for general maintenance or repair valued under $3,000. Whoever got the permit, owner or contractor, is responsible for scheduling the inspections, and you need the permit number and the inspection code to schedule one. The City says inspections are requested before any work is covered.

Ask the contractor when the permit will be pulled and when the inspection is booked before work starts. The FTC lists a contractor who asks you to get the required building permits yourself as a warning sign, so if a company proposes that on a job that needs a permit, ask why.

What happens without a permit

Work found without a permit gets a Stop Work (red tag) notice and can be charged a double fee. If a permit is still not obtained, the City files a Certificate of Non-Compliance on the property.

Codes and licences

Utah adopts one statewide construction code, and the updated codes took effect July 1, 2026. The mechanical side is the 2024 International Mechanical Code. Homes follow the 2021 International Residential Code, which carries its own mechanical and fuel-gas chapters. Utah's code page lists the 2024 International Fuel Gas Code and the 2023 National Electrical Code as well.

Utah law requires anyone working as a contractor in a licensed construction trade, HVAC included, to hold a state license before doing the work. Utah lists HVAC contractor as its own contractor license classification, and it is unlawful for an unlicensed, non-exempt person to submit a bid for work that needs a contractor license. Ask for the contractor's Utah licence number and look it up on the state licensing site before you sign. Check that your bid and contract show the contractor's Utah licence number.

How to choose a ductwork company

If you are searching for ductwork repair near me, ask these questions of every company you call. They come from Utah's licensing division, the Federal Trade Commission and the Better Business Bureau.

  • License and insurance. The FTC says to consider only contractors that hold a license and carry insurance, and to ask for proof of insurance. Ask the contractor for a current certificate of insurance and check the license status on dopl.utah.gov before work starts. Licensed Utah contractors must hold and maintain liability coverage. An unlicensed contractor working on your property could make you liable if any of its workers or subcontractors are injured.
  • More than one bid. Utah's licensing division says to get bids from 2 to 3 contractors and check at least 3 references for each. The FTC agrees that you should get more than one estimate and not automatically choose the lowest bidder.
  • Payment. Keep the deposit small, pay as the work is completed, and never pay in cash. The FTC adds that you should not make the final payment until the work is done and you are satisfied.
  • Warranty. The BBB says to ask whether labor is included in the guarantee, whether it covers the whole job or only some parts, and who backs it: the dealer or the manufacturer. Ask for the labor warranty in writing, along with the manufacturer's parts warranty and how to register it.
  • Permit on the job. Ask whether the contractor has pulled every required building permit. Utah's guide says permits should be provided to you or displayed on the job site.
  • Lien releases. Before the final payment, make sure the contractor has signed lien releases from all suppliers and subcontractors. Lien status is on Utah's State Construction Registry.

Warning signs

The FTC lists these signs of a home improvement scam: a knock at your door from someone who says they are in the area or have materials left over from another job, pressure for an immediate decision, a request for everything up front, and cash-only terms. It also says never to agree to financing through your contractor without shopping around and comparing loan terms. An FTC winter alert says to be skeptical of offers that promise drastic energy savings and to get any such offer in writing before you sign. If you signed a contract in your home or anywhere other than the seller's permanent place of business, the FTC Cooling-Off Rule lets you cancel within 3 business days.

Call (385) 832-6187Get your quote

Common problems and what they mean

One Room Colder Than Others

One room colder than others in Salt Lake City? See the causes the national guides name, what to check first, duct repair costs and how to get a written price.

Dust Coming From Vents

Dust coming from vents in Salt Lake City? See when EPA says duct cleaning is warranted, what to check first, national costs and how to get a written price.

Leaky Ducts

Leaky ducts in Salt Lake City? See what a disconnected or crushed duct means, national duct repair costs, permit rules and how to get a written price first.

For typical prices and what moves them, see HVAC Cost.

Nearby towns

Town guides: HVAC in West Valley City, UT, HVAC in West Jordan, UT, HVAC in Murray, UT.

What is your heating or cooling system doing?

Pick what you see, smell or notice to read what government and equipment maker pages say it can mean and what to do first.

I smell gas in or near the house
If the smell is strong or you are not sure, leave the building right away, tell others to leave, and then call your gas company or 911 from a phone away from the smell, such as a neighbor's. Do not flip light switches, use a phone near the smell, adjust the thermostat or appliance controls, or light matches or candles. Do not go back inside until your gas company says it is safe. (Connecticut Public Utilities Regulatory Authority)
A carbon monoxide alarm is going off, or people feel sick and better once outside
Get outside to fresh air right away, and then call 911. Symptoms of carbon monoxide poisoning include headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion, and the EPA says they can feel like the flu and clear up after leaving home. The EPA says to have a trained professional inspect, clean and tune up the central heating system (furnaces, flues and chimneys) every year. (U.S. Consumer Product Safety Commission, U.S. Environmental Protection Agency)
The furnace will not turn on and the house has no heat
One equipment maker's guide lists basic checks: the thermostat is set to heat and above the room temperature, the breaker marked furnace or heat is on, the furnace power switch is on, and the air filter is not clogged. More technical causes it names are a faulty ignition system, a dirty flame sensor, blocked air vents or a tripped limit switch. If the basic checks do not fix it, it says a professional HVAC contractor should inspect the system. If you smell gas, follow the gas answer instead. (Carrier) Read more
The furnace keeps turning on and off before the house warms up
This is called short cycling. One equipment maker's guide says restricted airflow from a dirty filter can make the heat exchanger overheat and trigger a safety shutoff. Check the filter first. If the furnace keeps short cycling, the guide says to contact a qualified HVAC professional. (Carrier) Read more
The air conditioner runs but blows warm air
One equipment maker's guide says to set the thermostat to Cool with the fan on Auto, replace a clogged filter, and confirm the breaker has not tripped and the outdoor unit's power switch is on. It recommends turning the AC off if it keeps blowing warm air. Causes it names include a refrigerant leak, faulty contactors or capacitors, a failing blower motor and a failed or overheated compressor. If the checks do not fix it, it says to contact a professional HVAC technician. (Carrier) Read more
There is ice on the AC coil or the copper lines
One equipment maker's guide says to turn the AC off right away so the ice can thaw, and to check the air filter and replace it if dirty. It names restricted airflow from dirty filters or blocked vents, and a refrigerant leak or low refrigerant, as causes. If the system freezes again after restarting, it says to contact a technician. (Carrier) Read more
Water is pooling around the indoor unit or furnace while the AC runs
ENERGY STAR's maintenance checklist says to check the condensate drain in a central air conditioner, furnace or heat pump in cooling mode, because a plugged drain can cause water damage in the house and affect indoor humidity levels. The same checklist has a contractor do a check-up every year, the cooling system in spring and the heating system in fall. (ENERGY STAR (U.S. EPA)) Read more
The outdoor heat pump unit is steaming or covered in frost in winter
A heat pump melts frost off its outdoor unit with defrost cycles. One heat pump maker says a cloud of steam from the outdoor unit is the ice melting and evaporating, and is normal. The same maker says to have it looked at if the heat pump seems to switch into defrost constantly, or if the defrost cycles last longer and longer while frost and ice start to cover the unit. (Trane) Read more
Dust blows out of the vents, or there seems to be mold or pests in the ducts
The EPA says duct cleaning has never been shown to actually prevent health problems. It lists when to consider cleaning: substantial visible mold growth inside hard-surface ducts, ducts infested with rodents or insects, or ducts clogged with excessive dust and debris, or releasing particles into the home. It adds that something that looks like mold may need laboratory analysis to confirm. (U.S. Environmental Protection Agency) Read more

The gas and carbon monoxide answers follow the wording of the U.S. Consumer Product Safety Commission, the U.S. EPA and Connecticut's utility regulator; follow your own gas company's instructions. The other answers list first checks and likely causes from two equipment makers' homeowner guides, ENERGY STAR and the EPA; they are not a diagnosis.

Sources: U.S. Consumer Product Safety Commission, U.S. Environmental Protection Agency, Connecticut Public Utilities Regulatory Authority, Carrier, Carrier, Carrier, Carrier, ENERGY STAR (U.S. EPA), Trane, U.S. Environmental Protection Agency.

Call (385) 832-6187Get your quote

Ductwork repair and air duct cleaning FAQ

How much does duct installation cost?

Nationally, new ductwork with an AC installation costs $1,100 to $2,700, with a furnace $2,000 to $5,000, and with a heat pump $3,000 to $7,500 (Bob Vila, 2024). Replacing existing ducts is priced per foot instead, and the figure is in the table above. Prices in Salt Lake City depend on your home and equipment, so ask for a written price after the technician sees the system.

How long does ductwork last?

It depends on the material: flexible ducts 10 to 20 years, fiberboard 10 to 15 years, and sheet metal 20 years or more, according to This Old House's 2026 national guide. Treat those as a starting point for your own home, and ask the crew what material your ducts are made of.

Should I replace or repair my ductwork?

Start with how much of the duct system is damaged and what it is made of. A national duct repair runs $200 to $800 (Bob Vila, 2023). Ask for repair and replacement prices in writing when both options make sense, so you can compare them side by side.

How do I know if my ductwork needs repair?

Look for rooms that stay hotter or colder than the rest of the house, and for ducts that are disconnected or crushed where you can see them. A duct inspection nationally runs $70 to $130 (Bob Vila, 2023), and a technician can tell you what the system needs.

Should I have the air ducts in my home cleaned?

Only if there is a reason. EPA lists three: substantial visible mold in hard-surface ducts, vermin in the ducts, or ducts clogged with excessive dust and debris. Without one of those, EPA's position is that routine cleaning is not recommended.

What is an HVAC zoning system and do I need one?

A zoning system uses dampers in the ducts and more than one thermostat to control different areas of the home. Whether you need one depends on your rooms and ducts, so ask the technician what balancing could do first.

Get a written price for your ducts

Call us or use the form. We call you back within one business day, the crew comes out and measures, and you get a written price before any work starts. When the job needs a City permit, we pull it. You can also reach us through the contact page.

Call (385) 832-6187

Talk to HVAC Salt Lake City UT

Call HVAC Salt Lake City UT or fill in the form. Within one business day we call you back to talk about your hvac job.

CallQuote