Skip to content
HVAC Salt Lake City UTSalt Lake City, UT · HvacCall (385) 832-6187
Aerial view of rooftop cooling fans and HVAC equipment on a city building

Serving Salt Lake City, West Valley City, West Jordan, Murray and nearby towns

HVAC Maintenance in Salt Lake City, UT

Ac repair, ac installation and replacement and furnace repair for homes and businesses in Salt Lake City, West Valley City and West Jordan.

  • No cost to ask
  • Done by HVAC Salt Lake City UT
  • You decide whether to hire
  • No cost to askAsking for a price costs you nothing.
  • Done by HVAC Salt Lake City UTHVAC Salt Lake City UT prices the job, then does it.
  • Sourced prices and rulesEach price, permit and local rule here shows where it came from and when.
  • Updated November 22, 2026Pages are reviewed before they go live and dated when they change.

HVAC Salt Lake City UT · AC tune-ups, furnace tune-ups and heat pump service for homes in Salt Lake City, West Valley City, West Jordan and Murray.

HVAC maintenance in Salt Lake City comes down to one tune-up a year for each part of the system. This Old House puts the AC tune-up in early spring and the furnace tune-up in the fall. A national range for one annual HVAC maintenance visit is $75 to $200 (This Old House, June 2026), and a tune-up takes about 1 to 2 hours when no repairs are needed (Bob Vila). Prices in Salt Lake City depend on your home and equipment, so ask for a written price after the technician sees the system.

This page covers what each visit involves, how often to book it, what it costs, what a maintenance plan should say in writing and how to pick an HVAC maintenance company. Whatever the visit is called, whether an HVAC inspection, an HVAC system check or a home HVAC inspection, ask for what it covers in writing.

How often to book annual HVAC maintenance

How often should HVAC systems be serviced? This Old House says once a year for each part of the system: the AC in early spring and the furnace in the fall. The U.S. Department of Energy says a regular maintenance schedule can cut heating and cooling costs by 10% or more and prolong equipment life (a national figure), and it also says to inspect the AC in spring and the furnace in fall. That is preventative maintenance in its simplest form: two scheduled visits, one for cooling and one for heating.

Why spring and fall suit Salt Lake City

NOAA's 1991-2020 normals for Salt Lake City International Airport show that heating is the bigger load here. The airport logs 5,154 heating degree days a year against 1,420 cooling degree days. December and January are the peak heating months, with about 1,018 and 1,041 heating degree days. July and August are the peak cooling months, with about 500 and 441 cooling degree days. May to September carries nearly all cooling. The average July high is 94.0 degrees F. The airport sees about 62 days a year at 90 degrees or hotter and about 112 nights a year at or below freezing.

April and October are the mildest months, with about 400 and 337 heating degree days and almost no cooling degree days. Low loads in those months make April and October a sensible time for a spring AC tune-up and a fall furnace tune-up. A seasonal HVAC maintenance schedule built on those two visits checks the AC before the cooling months of May to September. It checks the furnace before the heating peak in December and January.

Preparing for extreme temperature swings

The same NOAA normals show how wide the swing is: about 7.6 days a year at 100 degrees F or hotter, and an average January low of 24.2 degrees F. Each season asks something different of the equipment, so preparation has two sides. Book the spring AC tune-up and the fall furnace tune-up. Keep weeds and debris clear around the outdoor AC or heat pump so air can circulate freely (U.S. DOE). With a heat pump, This Old House says to set the outdoor unit on a snow stand a foot or more off the ground and still clear snow off the top after storms. Salt Lake City averages 51.9 inches of snow a year at the airport.

AC tune-up and air conditioner maintenance

An AC tune-up is the yearly service visit for a central air conditioner. It is also sold as an AC check up, AC maintenance service or air conditioner maintenance. This Old House gives a national range of $65 to $200 for an AC tune-up, with a $133 average (March 2026). Repairs found during the tune-up cost extra.

What an AC tune-up includes

Ask every company for its AC maintenance checklist in writing. Published guides price several items separately. These are national ranges from This Old House (2026). Cleaning the evaporator and condenser coils is $50 to $350. Cleaning the condensate drain line is $80 to $250. A thermostat replacement is $100 to $600 as an add-on. A refrigerant recharge is $100 to $500. Bob Vila notes that a recharge is done after a leak is repaired, not instead of the repair.

The drain line deserves a question. The most common cause of a central AC leaking water indoors is a clogged condensate drain line, with dirt, dust and mold building up in the line over time (Bob Vila). A dirty or full filter can also let ice form on the evaporator coil, which then melts into pooled water below the unit. A refrigerant leak makes the AC work harder and can freeze the coils. If a visit turns up a repair, read about what an AC repair involves and ask for the written price before you agree.

If your system uses R-22, ask for written prices to repair it and to replace it so you can compare. No EPA rule makes you replace or convert a working R-22 system, and after 2020 only recycled, reclaimed or previously produced R-22 can be used to service existing equipment. An existing R-410A system can still be repaired too, because parts used to repair existing air conditioners and heat pumps are not covered by the new refrigerant limits.

Heat pump maintenance

A heat pump heats and cools, so its yearly visit covers both seasons. This Old House says to maintain a heat pump once a year: filter service, refrigerant checks, an electrical inspection and condenser cleaning. A homeowner guide from the Consortium for Energy Efficiency, hosted by the U.S. DOE, says most heat pump makers call for service every 1 to 2 years. The visit checks refrigerant charge and leaks, airflow, both coils and the drain pan. It also checks that backup heat runs only when needed. A national range for a heat pump maintenance visit is $75 to $150 (This Old House, June 2026). Ducted heat pump filters need attention about every 90 days.

Between visits, watch the outdoor unit. Frost on a heat pump below 32 degrees F is normal: it runs a defrost cycle of about 5 to 15 minutes, and if it is stuck in defrost or covered in ice, call an HVAC professional. Auxiliary heat is electric strip heat, which is costly and inefficient, so if it runs often or shows constantly on the thermostat, have the unit checked. The most common sign a heat pump is not working right is a sudden jump in electricity use on the utility bill. The DOE says regular maintenance, meaning refrigerant charge and filter changes, keeps peak performance.

Ductless mini-split maintenance

A mini-split tune-up has a national average of $300, within a $200 to $400 range (This Old House, March 2026). Mini-split filters should be cleaned at least monthly, and more often with pets. The most common reason a mini-split leaks is a blocked drain line. The leak may also be refrigerant, which only a certified technician should handle. If the unit shows an error, write down the blinking pattern or code and the model number, then call so the technician can look it up before the visit.

Furnace tune-up, safety checks and carbon monoxide testing

What is included in a furnace tune-up

A furnace tune-up, also called furnace maintenance, heating maintenance, a heating tune-up or a furnace check up, is the fall visit that gets the heat ready for the peak months. The EPA says to have a trained professional inspect, clean and tune the furnace, flues and chimneys once a year, and notes that the Consumer Product Safety Commission urges an annual professional inspection of all fuel-burning appliances. That makes an annual furnace inspection the baseline, not an extra.

This Old House says a service visit checks the color and shape of the pilot light flame and measures exhaust gases. A yellow, orange or flickering flame is a sign of a serious issue, because the flame should burn blue and steady. A national range for furnace cleaning is $70 to $300 (Bob Vila, January 2024). Ask the crew what the furnace tune-up covers, and ask for the written price of any repair it finds. For the repairs themselves, see our furnace repair page.

Furnace safety inspection and carbon monoxide testing

Leaking furnaces and chimneys, and worn or poorly maintained furnaces, are carbon monoxide sources in homes (EPA). That is why a furnace safety inspection belongs on your list: ask whether the visit includes a carbon monoxide test of the furnace and how the result is reported. A cracked heat exchanger can let carbon monoxide into the home instead of venting it outside. Soot in the furnace and clicking or popping as it heats are warning signs (Bob Vila).

Put battery or battery-backup carbon monoxide alarms on every level of the home and outside sleeping areas (CPSC). The signs of poisoning are headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion. The EPA adds that flu-like symptoms that clear up after you leave home point to carbon monoxide.

If you smell gas, leave the building right away, leaving doors and windows open behind you if you can do it without delay. Do not use phones, switches or electronics, do not turn lights or appliances on or off, and do not smoke. Make your calls to the gas company from a safe place. Do not search for or try to repair a gas leak yourself. Natural gas has no smell of its own: an added chemical, mercaptan, makes it smell like sulfur or rotten eggs, and a hissing or whistling sound near pipes or appliances is another warning sign (Enbridge Gas).

Utah law adds a rule for the repair side: even on small jobs, installing, repairing or replacing a gas appliance or combustion system must be done by a person certified under Utah Code 58-55-308. Ask the installer to confirm the furnace is set up for our elevation as its manual requires. The NOAA station near the airport sits at about 4,226 feet above sea level, and other parts of the city sit higher.

Call (385) 832-6187Get your quote

Filters and what you can do between visits

How often to change your air filter

This Old House says to change disposable fiberglass filters every 30 days, and its furnace guide says to check the furnace filter monthly and replace it at least every 3 months, more often with pets or allergies. The EPA says to replace filters as the maker says; makers typically suggest every 60 to 90 days, and sooner when the filter is heavily soiled. A clogged filter restricts airflow, so the furnace runs until it overheats and shuts itself off. A loud hum or whistle often comes from a clogged filter cutting airflow.

The filter matters in Salt Lake winters. Strong multi-day inversions trap pollution near the ground in the Salt Lake Valley, mostly in December, January and early February. Winter fine-particle levels in the Salt Lake area exceed national air quality standards on about 18 days a year on average (NOAA Chemical Sciences Laboratory). The EPA advises a filter rated at least MERV 13, or as high as the system fan and filter slot allow. A MERV 13 filter catches at least 50% of particles 0.3 to 1.0 microns, 85% of 1.0 to 3.0 microns and 90% of 3.0 to 10 microns.

On smoky days, the EPA says to close the HVAC fresh-air intake or set the system to recirculate. It also says to switch the thermostat fan from Auto to On so the filter runs all the time. A MERV 13 or higher filter with the fan always running may cut indoor PM2.5 by about 50%. A typical low-efficiency filter cuts about 24% (an EPA estimate that varies by home). In winter, a fan left on keeps the blower running between heating cycles, so the vents blow cool air. Auto runs the fan only while heating. The EPA also says to avoid furnace filters and portable air cleaners that intentionally make ozone.

What homeowners can do themselves

How can you maintain your HVAC system between professional visits? Check the filter monthly. Clean mini-split filters at least monthly. Keep weeds, debris and snow clear around the outdoor unit, because a heat pump outdoor unit needs plenty of airflow around and through it or it cannot run. If you run a humidifier, do not humidify indoor air above 50 percent relative humidity; a hygrometer from a hardware store measures it. If water condenses on windows, walls or pictures, lower the humidifier setting or use it less. Replace humidifier filters once a season, or as the maker recommends.

The thermostat is the other lever. Turning it back 7 to 10 degrees F for 8 hours a day can save as much as 10% a year on heating and cooling (DOE, national figure), though the DOE notes that programmable thermostats have generally not been recommended for heat pump systems. If the thermostat screen is blank, check its batteries and the furnace power switch, then call if it still does not respond. Leave gas, refrigerant and electrical work to a technician.

HVAC maintenance plans, service agreements and warranties

What an HVAC maintenance agreement includes

An HVAC maintenance plan is a yearly inspect-and-service contract. You will also see it called an HVAC service agreement, a maintenance agreement, an AC maintenance plan or an AC and heating service plan. The Better Business Bureau says many contractors offer them, and advises comparing the cost against likely repairs and making sure the plan does not duplicate warranty coverage.

What do HVAC maintenance agreements usually include? The written terms decide, so ask for them before you pay: how many visits a year, which equipment each visit covers, what happens when a visit finds a repair, and whether labor is in the plan. The questions are the same whether it is called a plan, an agreement or an HVAC maintenance membership.

HVAC maintenance plan cost

Here is how the national plan prices compare (This Old House, 2026). An annual maintenance plan is $75 to $150 a year. A twice-a-year plan is $150 to $300. A single annual maintenance visit is $75 to $200. Divide a plan's price by its number of visits. Then set the result against that single-visit range.

Maintenance and manufacturer warranties

This Old House says a warranty claim may need proof that the system had regular maintenance. Most central air conditioners come with a manufacturer's warranty of 5 to 10 years, and terms vary by maker and registration (Bob Vila, national). A new furnace comes with a warranty too, and some makers require professional installation to keep it active. Whether a tune-up keeps a warranty valid is set by the maker's own terms, so read yours.

Ask for the labor warranty in writing, along with the manufacturer's parts warranty and how to register it. The BBB suggests asking whether labor is included in the guarantee, whether it covers the whole job or only some parts, and who backs it: the dealer or the manufacturer. If the system is still under warranty, replacement parts may cost nothing and the owner pays only for labor (This Old House). An extended AC warranty is $100 to $500 nationally (Bob Vila, 2024). Bob Vila notes these often cost more than standard repairs.

HVAC maintenance cost in Salt Lake City

The ranges below are national figures from published cost guides, each dated in the table. The number to go by is the written price you get after the technician sees your system. For the wider picture, see what HVAC work costs in Salt Lake City.

ItemNational rangeSource
Annual HVAC maintenance visit$75 to $200This Old House, June 2026
AC tune-up (average $133)$65 to $200This Old House, March 2026
Heat pump maintenance visit$75 to $150This Old House, June 2026
Mini-split tune-up (average $300)$200 to $400This Old House, March 2026
Furnace cleaning$70 to $300Bob Vila, January 2024
Annual maintenance plan$75 to $150 a yearThis Old House, June 2026
Twice-a-year maintenance plan$150 to $300This Old House, June 2026
Evaporator and condenser coil cleaning$50 to $350This Old House, June 2026
Condensate drain line cleaning$80 to $250This Old House, March 2026
Thermostat replacement (add-on)$100 to $600This Old House, March 2026
Diagnostic visit$75 to $150This Old House, March 2026
Air duct inspection$70 to $130Bob Vila, November 2023

What moves the price

For an HVAC tune up cost, the national figure to compare is $75 to $200 per annual HVAC maintenance visit (2026). For a furnace tune up cost, ask for a written price after the technician sees the system; the national range for furnace cleaning is $70 to $300 (Bob Vila, 2024). The AC tune up cost has its own range of $65 to $200. The type of equipment moves the price. A mini-split tune-up averages $300 against $133 for an AC. The number of visits moves it too, since a twice-a-year plan costs more than an annual one. Add-ons such as coil cleaning, drain line cleaning or a new thermostat are priced on top, as are any repairs found. Bob Vila gives $75 to $150 an hour for HVAC labor nationally (March 2023). Ask for the written price of every item before work starts.

Call (385) 832-6187Get your quote

Signs your system is overdue for service

Heating signs

A yellow, orange or flickering pilot light flame is a sign of a serious issue. If the flame sensor cannot detect a flame, often because it is dirty, it shuts the furnace down to keep unburned gas from escaping. A bang when the furnace starts usually means delayed ignition. A dirty burner lets fuel build up before it lights.

A squeal usually comes from a worn blower belt. Metal scraping on metal can mean a loose or broken blower wheel, so shut the furnace off and call a technician. On a high-efficiency furnace, a condensate line blocked by dust, dirt, mold or ice can trip a safety switch that shuts the heat off.

A burning-dust smell when the heat first comes on is harmless and goes away. If it lingers, the filter may need replacing or the furnace may have a bigger problem. A burning-plastic, electrical or fishy smell means something is overheating. Stop using it and turn off the circuit breaker, because the burning could lead to a fire.

Cooling signs

Before a service call for warm air, check that the thermostat was not switched to heat or auto by accident. An AC that will not run may have tripped its breaker or blown a fuse on the start-up power surge, and a breaker that trips again needs a technician. Pooled water below the unit or ice on the coil points back to the drain line, filter and refrigerant checks above. For heat pumps, the Consortium for Energy Efficiency guide also lists frequent cycling, a setpoint that is never reached, frozen coils and strange smells.

Age of the equipment

This Old House gives 10 to 15 years for an air conditioner or heat pump and 15 to 25 years for a furnace. ENERGY STAR says to consider replacing a heat pump or air conditioner that is more than 10 years old, and a furnace or boiler that is more than 15 years old. This Old House (2026) gives a rule of thumb for AC. Replace rather than repair when the unit is over 10 years old and the repair cost times its age is more than $5,000. Also replace when a repair costs more than half the price of the unit. Whatever the age, ask for written repair and replacement prices side by side.

How to choose an HVAC maintenance company

Licence, insurance and refrigerant certification

Utah law requires anyone working as a contractor in a licensed construction trade, HVAC included, to hold a state license before doing the work. Ask for the contractor's Utah licence number and look it up on the state licensing site before you sign. Check that your bid and contract show the contractor's Utah licence number. Licensed Utah contractors must hold and maintain liability coverage. An unlicensed contractor working on your property could make you liable if any of its workers or subcontractors are injured (Utah Division of Professional Licensing). Ask the contractor for a current certificate of insurance and check the license status on dopl.utah.gov before work starts.

Technicians who service equipment that could release refrigerants must hold EPA Section 608 certification. Federal rules forbid intentionally venting refrigerant. Work with a company whose technicians are EPA-certified to handle refrigerants.

Bids, contracts and payment

Utah's licensing division advises getting bids from 2 to 3 contractors and checking at least 3 references for each before you choose. Put every job in a written contract with the exact work, the price, start and finish dates, who gets the permit, a guarantee of liability coverage, the contractor's license number and your right to cancel, with no blank spaces. Keep the deposit small, pay as the work is completed, and never pay in cash. Under the FTC Cooling-Off Rule you can cancel within 3 business days if you signed the contract in your home or anywhere other than the seller's permanent place of business.

Know the warning signs. Scammers knock on your door because they are "in the area" or say they have materials left over from another job, and they pressure you for an immediate decision (FTC). Be skeptical of offers that promise drastic energy savings, and get any offer to cut utility bills in writing before you sign. EPA does not recommend routine duct cleaning, only cleaning as needed, and says not to hire duct cleaners who sell it as routine maintenance.

Permits for work found at a visit

A tune-up is a service visit, but a repair that alters the system can need a permit. Salt Lake City requires a permit to install or alter a home's mechanical (heating, ventilation and air conditioning), electrical or plumbing system. Work found without a permit gets a Stop Work (red tag) notice and can be charged a double fee. When the job needs a City permit, the crew pulls it. Ask for the permit fee to be listed as its own line on your written quote.

Questions about HVAC maintenance

How often should HVAC systems be serviced?

Once a year for each part: the AC in early spring and the furnace in the fall, per This Old House. Most heat pump makers call for service every 1 to 2 years.

What is included in a furnace tune-up?

A service visit checks the pilot light flame color and shape and measures exhaust gases, and the EPA wants the furnace, flues and chimneys inspected, cleaned and tuned once a year. Ask the crew for the checklist in writing, and for the written price of any repair found.

How often should I change my air filter?

Check it monthly. Disposable fiberglass filters are changed every 30 days, and makers typically suggest every 60 to 90 days for other filters, sooner when the filter is heavily soiled. In Salt Lake winters, when inversions trap pollution near the ground in the valley, the EPA advises a filter rated at least MERV 13, or as high as the system fan and filter slot allow.

What do HVAC maintenance agreements usually include?

The written terms decide. Ask how many visits a year the plan covers, which equipment, what happens when a visit finds a repair, and whether labor is included. National plan prices run $75 to $150 a year for an annual plan and $150 to $300 for a twice-a-year plan (This Old House, 2026).

How can I maintain my HVAC system between professional visits?

Check the filter monthly, clear weeds, debris and snow from the outdoor unit, and clean mini-split filters at least monthly. Keep humidifier settings under 50 percent relative humidity, and leave gas, refrigerant and electrical work to a technician.

How can I prepare my HVAC system for extreme temperature swings?

Book the spring AC tune-up and the fall furnace tune-up, keep the outdoor unit clear, and put a heat pump outdoor unit on a snow stand a foot or more off the ground. Salt Lake City airport normals run from an average July high of 94.0 degrees F to an average January low of 24.2 degrees F.

Call (385) 832-6187Get your quote

Common problems and what they mean

High Energy Bills From Your HVAC

High energy bills HVAC causes in Salt Lake City: clogged filters, leaky ducts, backup heat, low refrigerant and age. What to check and what a visit costs.

For typical prices and what moves them, see HVAC Cost.

Nearby towns

Town guides: HVAC in West Valley City, UT, HVAC in West Jordan, UT, HVAC in Murray, UT.

What is your heating or cooling system doing?

Pick what you see, smell or notice to read what government and equipment maker pages say it can mean and what to do first.

I smell gas in or near the house
If the smell is strong or you are not sure, leave the building right away, tell others to leave, and then call your gas company or 911 from a phone away from the smell, such as a neighbor's. Do not flip light switches, use a phone near the smell, adjust the thermostat or appliance controls, or light matches or candles. Do not go back inside until your gas company says it is safe. (Connecticut Public Utilities Regulatory Authority)
A carbon monoxide alarm is going off, or people feel sick and better once outside
Get outside to fresh air right away, and then call 911. Symptoms of carbon monoxide poisoning include headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion, and the EPA says they can feel like the flu and clear up after leaving home. The EPA says to have a trained professional inspect, clean and tune up the central heating system (furnaces, flues and chimneys) every year. (U.S. Consumer Product Safety Commission, U.S. Environmental Protection Agency)
The furnace will not turn on and the house has no heat
One equipment maker's guide lists basic checks: the thermostat is set to heat and above the room temperature, the breaker marked furnace or heat is on, the furnace power switch is on, and the air filter is not clogged. More technical causes it names are a faulty ignition system, a dirty flame sensor, blocked air vents or a tripped limit switch. If the basic checks do not fix it, it says a professional HVAC contractor should inspect the system. If you smell gas, follow the gas answer instead. (Carrier) Read more
The furnace keeps turning on and off before the house warms up
This is called short cycling. One equipment maker's guide says restricted airflow from a dirty filter can make the heat exchanger overheat and trigger a safety shutoff. Check the filter first. If the furnace keeps short cycling, the guide says to contact a qualified HVAC professional. (Carrier) Read more
The air conditioner runs but blows warm air
One equipment maker's guide says to set the thermostat to Cool with the fan on Auto, replace a clogged filter, and confirm the breaker has not tripped and the outdoor unit's power switch is on. It recommends turning the AC off if it keeps blowing warm air. Causes it names include a refrigerant leak, faulty contactors or capacitors, a failing blower motor and a failed or overheated compressor. If the checks do not fix it, it says to contact a professional HVAC technician. (Carrier) Read more
There is ice on the AC coil or the copper lines
One equipment maker's guide says to turn the AC off right away so the ice can thaw, and to check the air filter and replace it if dirty. It names restricted airflow from dirty filters or blocked vents, and a refrigerant leak or low refrigerant, as causes. If the system freezes again after restarting, it says to contact a technician. (Carrier) Read more
Water is pooling around the indoor unit or furnace while the AC runs
ENERGY STAR's maintenance checklist says to check the condensate drain in a central air conditioner, furnace or heat pump in cooling mode, because a plugged drain can cause water damage in the house and affect indoor humidity levels. The same checklist has a contractor do a check-up every year, the cooling system in spring and the heating system in fall. (ENERGY STAR (U.S. EPA)) Read more
The outdoor heat pump unit is steaming or covered in frost in winter
A heat pump melts frost off its outdoor unit with defrost cycles. One heat pump maker says a cloud of steam from the outdoor unit is the ice melting and evaporating, and is normal. The same maker says to have it looked at if the heat pump seems to switch into defrost constantly, or if the defrost cycles last longer and longer while frost and ice start to cover the unit. (Trane) Read more
Dust blows out of the vents, or there seems to be mold or pests in the ducts
The EPA says duct cleaning has never been shown to actually prevent health problems. It lists when to consider cleaning: substantial visible mold growth inside hard-surface ducts, ducts infested with rodents or insects, or ducts clogged with excessive dust and debris, or releasing particles into the home. It adds that something that looks like mold may need laboratory analysis to confirm. (U.S. Environmental Protection Agency) Read more

The gas and carbon monoxide answers follow the wording of the U.S. Consumer Product Safety Commission, the U.S. EPA and Connecticut's utility regulator; follow your own gas company's instructions. The other answers list first checks and likely causes from two equipment makers' homeowner guides, ENERGY STAR and the EPA; they are not a diagnosis.

Sources: U.S. Consumer Product Safety Commission, U.S. Environmental Protection Agency, Connecticut Public Utilities Regulatory Authority, Carrier, Carrier, Carrier, Carrier, ENERGY STAR (U.S. EPA), Trane, U.S. Environmental Protection Agency.

Call or send the form to book HVAC maintenance

Looking for HVAC maintenance near me in Salt Lake City, West Valley City, West Jordan or Murray? Call or send the form and we call you back within one business day. The crew comes out and measures, gives a written price before any work starts, and pulls the City permit when the job needs one. You can also contact HVAC Salt Lake City UT with your system's age and what it is doing.

CallQuote